Tine Implements

  • Chisel Plough Hydraulic Reset – CCPH

    The Erdvark Hydraulic Reset Chisel Plough is available in 3-Point and Trailed models. The tines have a break away force of 10 kN. The tines working depth is 475 mm but can work in light soils up to 525 mm.The under frame clearance is 725 mm and optional depth control wheels are available. The shanks are fitted with a special knock-on tip that manufactured out of special hardened material with tungsten carbide infused onto the tips. Tine spacing can be set at 300mm, 400mm and 450mm.

  • Ripper V Frame 3-Point Deep Rip Stretch Bolt – SBR

    The SBR 3-Point Ripper is a V frame type. The Ripper Tine have a unique Stretch Bolt Safety system and fitted with a Tungsten infused knock-on tip. The Ripper is available in 1 to 9 tooth with a working depth of 600 mm and shank spacing of 500 mm. Shanks are manufactured out of 30mm special hardened steel and is protected by a shin plate. Depth control wheels as additional option. Special shank available to fit adjustable wings for excellent aeration and loosening of compact layers.

  • Ripper Deep Hydraulic Reset 3-Point – HRR

    The 3-Point Heavy Duty Erdvark Hydraulic Reset Ripper can handle tuff conditions from 20kN to 40kN. The robust Erdvark shank construction and hydraulic reset plus the additional stretch bolt safety design, can handles all ruff and difficult ripping conditions. The working depth of the Erdvark HRR Hydraulic Reset Ripper is from 650 mm, 850 mm and 1050 mm. The shank is manufactured out of 30mm hard-wearing steel and is fitted with a special hard wearing tip with tungsten carbide infused onto the tip. The shank is also fitted with a shin wear plate to protect the shank from wearing. A special shank is available to fit adjustable wings for excellent aeration and loosening of compact layers.

     

  • Spike Harrow Trailed & 3-Point – EG

    The Spike Harrow range is available in the 25 kg with 16 mm spikes, 45 kg with 20 mm spikes and 64 kg with 50 x 10 mm double sided spikes. There is a trailed Toolbar or 3-point hitch Toolbar available for the spike harrows.

  • Ripper Deep Hydraulic Reset Trailed – HRRT

    The Trailed Heavy Duty Erdvark Hydraulic Reset Ripper can handle tuff conditions from 20kN to 40kN. The robust Erdvark shank construction and hydraulic reset system plus the additional stretch bolt safety design, can handle all tuff and difficult ripping conditions. The working depth of the Erdvark HRRT Hydraulic Reset Ripper is from 650 mm, 850 mm and 1050 mm. The shank is manufactured out of 30mm hard-wearing steel and is fitted with a special hard wearing tip with additional tungsten carbide infused onto the tip. The shank is also fitted with a shin wear plate to protect the shank from wearing. A special shank is available to fit adjustable wings for excellent aeration and loosening of compact layers.

  • Chisel Plough Three Point – HTG

    The 3-point Erdvark Chisel Plough with coil springs is excellent for orchards, vineyards and seedbed preparation. It has a welded mainframe with a 3-point hitch for suitable for CATI & II. The Chisel plough is available in 5, 7, 9 and 11 tines with 280mm spacing. The Chisel Plough has good penetration ability. The unique shanks are solid and can be set at different lengths and angles. The shank is fitted with a standard curved reversible chisel point. Each tine is coil spring loaded with a centre pivot action. The working depth is up to 300 mm.