Tandem Disc Row Crop – DTT

Tandem Disc Row Crop – DTT

The Erdvark Tandem Disc for Row Crops is developed to work in row crop crops. The Tandem has a special frame and hangers to run freely over the crops. The disc angles can be set between 18° -24°. The 4 gangs can be moved on the gang beam inward or outwards. There are two protection plates on the inner row to protect young seedlings from sod damage.
There are already units running in the Rooibos tea crops with success. The unit can also be used to prepare the plant beds for Rooibos Tea, vegetables and other row crop crops.

1) The DTT Tandem disc primary use is for cultivation in row crops like Rooibos Tea, vegetables and any single row crops.
2) The Tandem disc can also be used to do planting bed preparation.
3) The DTT Tandem disc is available in a 12 and 16 disc model.
4) The working width is 1.29 m to 2.35 m on the 12 disc unit and 1.67 m to 2.75 m on the 16 disc unit.
5) The heavy mainframe has a special lower positioned welded three-point hitch that is suitable for Cat I and Cat II tractors.
6) The special higher disc hangers give the Tandem the high frame clearance to move freely over the crops.
7) All four gangs have a fixed undercarriage swivel point on the inner frame and a movable bracket on the outer to set working
angle between 18° and 24°.
8) The Tandem has a 9”(228 mm) cut and is fitted with 22”(560 mm) scalloped discs in the front and smooth units in the back.
9) The cutting width can be set on the upper hanger brackets, inwards or outwards, according to your row width.
10) The Tandem is fitted with a set of protection plates to protect young seedlings from sod damage.
11) The Erdvark bearing units require no service or lubrication. The bearings are assembled and lubricated with a special
lubricant in the factory and sealed with 32 mm HT round axle.
12) Erdvark guarantees that no dust and sand can enter the bearing unit under normal working conditions due to the Floating Duo-cone Seals fitted.

 
Model No  Discs  Mass kg. Mass per Disc Working Width Min. Working Width Max. Average Tractor Req.
DTT9-12 12 850 70 1.29 m 2.35 m 50 – 60 kW
DTT9-16 16 950 60 1.67 m 2.75 m 60 – 70 kW