Grader Trailed 3.8m 1800kg – G41

The G41 Grader blade width is 3.8 meters and the weight is 1800 kg. The Tractor requirement is 40 to 110 kW for general farm use.
The Erdvark G41 Grader is ideal for maintenance and building of roads, contours and is ideal for making new and maintaining existing fire breaks. The Erdvark G41 is an ideal Grader for municipalities to do maintenance on dirt roads. The Grader can also dig trenches and level irrigation fields. The Trailed Grader is full Hydraulic operated or Hydraulic and mechanical operated.

Erdvark overcomes the toughest grading conditions.

• • The G41 Grader with its heavy blade case design ensures that blade penetration is effective on tough surfaces.
  • The cutting angles of the blade can be mechanical or hydraulic adjusted from the tractor seat. The controls are easy and the operator does not have to spend hours optimizing the performance of the Grader.
  • The road camber and trenching adjustments can be done hydraulically by using the levers on the control system.
  • Cutting edges are easily replaceable, when cutting contours only the cutting side of the blade’s cutting edges are warn away and can be replaced when needed.
  • Erdvark manufacture Graders to suit you tractor and grading conditions.
  • Manufactured in South Africa for tuff African conditions.

G41A – Four pipes to tractor, use tractor 2 lever hydraulic system to operate Grader. The one lever operates the LH and the second lever operates the RH of the Grader wheels. For adjusting blade angle let one corner down and raise the other one. Pull rope and drive forward until preferred angle and release the rope.

G41B – Identical to G41A except a 2 lever control valve is fitted to the pipes of the Grader that must be mounted on tractor at hook-up and Grader control is done from this 2 lever control valve. Only 2 pipes go now to the tractor 1 lever hydraulic system, this control must be locked in open position to give priority to 2 lever Grader control valve to operate Grader.

G41C – Six pipes to tractor, use tractor3 lever hydraulic system to operate Grader. Levers 1 & 2 are for LH & RH and 3rd lever to adjust grading angle.

G41D – Two pipes to tractor with 2 lever control valve mounted on Grader with seat and seat belt for the operator. The blade angle adjustment is the same as G41A Grader. The tractor 1 lever hydraulic system must be locked in open position to give priority to 2 lever Grader control valve to operate the Grader.

G41E – Two pipes to tractor with 3 lever control valve mounted on Grader with seat and seat belt for the operator. Levers 1 & 2 are for LH & RH adjustment and 3rd lever to adjust grading angle. The tractor 1 lever hydraulic system must be locked in open position to give priority to 2 lever Grader control valve to operate  the Grader.

G41F – Two pipes to tractor with 4 lever control valve mounted on Grader with seat and seat belt for  the operator. Levers 1 & 2 are for LH & RH, 3rd lever to adjust grading angle. The 4th lever is to adjust steering. The tractor 1 lever hydraulic system must be locked in open position to give priority to 4 lever Grader control valve to operate the Grader.

G41G – Four pipes to tractor, use tractor 2 lever hydraulic system to operate Grader same as G41A Grader.
This model got a removable level attachment between the wheels to lock Grader into a level position. There are two shutoff valves mounted on the Grader that must be open in this mode, and the blade angle must be set to 90 degrees in relation to the drawbar. With all 4 pipes plugged into the tractor any one of the tractor control levers can operate the Grader up and down and it will always stay in a level position for land levelling. This Grader can be converted to a road Grader by removing the level attachment and close the two shutoff valves.

G41H – This Grader is identical to the G41G, it only got a 2 lever control valve on the pipes like the G41B.

G41J – This Grader is identical to the G41C, it only got a 3 lever control valve on the pipes like the G41B.

Optional Extras:
Tandem Wheels
Side plates

Blade width: 3800 mm.
Cutting angles:  90°, 80°, 70°, 60°, 50°.
Mould-board height:  590 mm.
Cutting edge width:  200 mm.
Transport length: 5000 mm.
Nominated kW:  40 tot 110.
Tyres:  7.50R16.